BMW 4 Series Gran Coupé G26 BMW Individual Aventurine Red metallic

THE 4

THE ALL-NEW BMW 4 SERIES GRAN COUPÉ: ENGINES & TECHNICAL DATA

The key facts and figures on the new BMW 4 Series Gran Coupé at a glance: engines, consumption, CO2 emissions and dimensions. Check out all the performance data such as displacement, horsepower, torque and acceleration – and find out which engine best meets your needs.

Read more
THE 4THE ALL-NEW BMW 4 SERIES GRAN COUPÉ: ENGINES & TECHNICAL DATA

TECHNICAL DATA OF THE ALL-NEW BMW 4 SERIES GRAN COUPÉ.

Select a model

Weight

Unladen weight EU in kg 1,900
Max. permissible weight in kg 2,380
Permitted load in kg 555
Permitted axle load front/rear in kg 1,145/1,325
Luggage capacity min. (seats up or roof down) in l 470
Luggage capacity max. (seats down or roof up) in l 1,290
Trailer load (unbraked) in kg 750
Trailer load 8% (braked) in kg -
Trailer load 12% (braked) in kg 1,800

Engine

Cylinders/valves 6/4
Capacity in ccm 2,998
Stroke/bore in mm 94.6/82.0
Engine power in kW at 1/min 285/5,800-6,500
Engine torque (Nm) at 1/min 500/1,900-5,000
Compression ratio : 1 10.2

Performance

Top speed in km/h 250
Acceleration 0–100 km/h in s 4.7

Wheels

Tyre dimensions front 245/40 R19
Tyre dimensions rear 255/40 R19
Wheel dimensions and material front 8.5J × 19 inches, light-alloy
Wheel dimensions and material rear 9J × 19 inches, light-alloy

BMW wheels and tyres EU tyre label close-up

BMW WHEELS & TYRES.

We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.

Fuel consumption and CO2 emissions of the BMW 4 Series Gran Coupé.

BMW M440i xDrive Gran Coupé:
Fuel consumption in l/100 km (combined): 8.5–8.0
CO2 emissions in g/km (combined): 194–181

Official data on fuel consumption and CO2 emissions were determined in accordance with the mandatory measurement procedure and comply with Regulation (EU) 715/2007 valid at the time of type approval. In case of a range, figures in the NEDC take into account differences in the selected wheel and tire size; figures in the WLTP take into account any optional equipment. WLTP values are used for assessing taxes and other vehicle-related charges that are (also) based on CO2 emissions, as well as for the purposes of vehicle-specific subsidies, if applicable. For more information on the WLTP and NEDC measurement procedures, see www.bmw.de/wltp.

Read more